film process

One can improves performance of hydrophone and simplify working process for the advantage of batch process by pour forming and winding composite film process in this paper.

采用的灌注成型工艺和复合膜卷绕技术，可使水听器的性能得到改善，并简化了工艺，利于水听器的批量生产。

Comparison of Heating Methods about Biaxially Oriented Polypropylene Film Process

双向拉伸薄膜生产线工艺加热方案的比较

Some viewpoints about Kaufman ion source used in thin film process

薄膜加工用考夫曼离子源的几个问题

In the study we investigated the stress testing and accelerated testing and found that the tablets is instable in high temperature and high humidity conditions, So we took cover film process.

对异福酰胺片分别进行了影响因素试验、加速试验稳定性考察，该片在高温、高湿条件下均不稳定，故对素片包薄膜衣；

The Chromate oxidized film process on the surface of aluminum protective film is studied. The optimal process is selected by orthogonal experiment.

研究了铝基防护层表面铬盐氧化处理工艺，采用正交试验方法优化了氧化溶液的配方，并确定了工艺条件，考察和比较了配方的性能指标。

The problem of crease in the inflation film process was improved significantly by adjusting the operation parameters.

对操作参数进行优化调整后，大幅度改善了吹膜工艺中存在的薄膜褶皱多的问题。

Then based on classical electrostatics-theory to analyze the interaction between ions and monolayer, and then analyze the effection from ions to monolayer by considering the force in pressing film process.

并依据经典的电磁理论对该模型下的各种相互作用进行分析，结合压膜过程中的受力情况分析离子对单分子膜所产生的影响。

The Development of WSix Polycide Thin Film Process

WSix复合栅薄膜工艺开发

The technologies include thin film process, pattern process and etching process. According to the development of nuclear target technology, the paper gives an overview of the advanced micro fabrication technologies and indicates the possible application of the technologies in the fields of nuclear target preparation.

文章介绍了现代微加工工艺中的薄膜技术、图形技术以及刻蚀技术，根据核靶技术的发展，阐明了现代微加工技术在核靶制备领域的广阔应用前景。

Although small driving voltage could be obtained, NG FED structure is not suitable for thick film process considering of the process and working principal. So it is difficult to cut down the fabrication cost, which is essential for large panel display.

虽然前栅极结构可以获得较小的驱动电压，但是无论从工艺制造还是器件工作特性方面考虑，均不适合采用厚膜制造工艺，因此这种结构不易降低制造成本，在大屏幕显示的应用方面非常困难。

The compatible problem among those processes, such as the tip process fabricated by wet etching, piezoelectric thin film process fabricated by sol-gel method, and the micro-cantilever releasing process fabricated by dry etching, was resolved by the method of local piezoelectric layer.

采用局部压电层的办法将湿法腐蚀针尖工艺、溶胶-凝胶法制作压电薄膜工艺以及干法刻蚀释放微悬臂梁工艺进行集成，解决了工艺兼容性问题，制作得到压电探针阵列。

Research status and prospect of film formation process of resin latex

树脂乳胶成膜过程的研究现状与前景

The present situation of domestic production of 73 wt% caustic soda and climbing film process is introduced. The development and design of climbing film process producing 73 wt% flake caustic soda from 45 wt% diaphragm caustic soda are discussed.

介绍了国内73%碱生产现状和升膜工艺情况，对以45%隔膜碱生产73%片碱的升膜蒸发工艺开发设计进行了探讨。

The film process for treating the oily sewage self-made film was used on a small facility for treating the oily wastewater.

在小型膜处理装置上用自制的膜对含油污水进行处理。

Study on Modeling and Simulating of Plastic Blown Film Process

吹塑薄膜成型工艺建模及仿真研究

Study of Thick Film Process for Carbon Nanotubes Field Emission Cathode

碳纳米管场发射阴极的厚膜工艺研究

The features and water quality of coke plant wastewater are introduced. And based upon development of waste water treatment technology the attached anoxic-oxic biological film process is proposed, which acquire good treatment effect in practical work.

介绍了焦化废水水质及其特征，并对其废水处理发展过程作了分析，提出了A/O+生物膜工艺的废水处理新方法，经在具体工程中应用，废水处理效果显著。

Study on High-press Vessel Oxidation Film Process on the Surface of Aluminium

铝表面高压釜氧化成膜工艺的研究

Fabricated with thick film process technology, the device has the advantages of wide operation range ( 10-48 V), high output current ( 3 A), high speed and low power. The use of the device also simplifies the external design of the system.

该电路采用厚膜工艺技术制造，具有工作电压范围宽（12~48V）、输出电流大（3A）、速度快、功耗低等特点，简化了外围设计。

The influencing factors and efficiency are studied when the process of attached anoxic-oxic biological film process is applied to the treatment of polyester wastewater.

研究了附着缺氧-生物膜工艺处理聚酯废水的影响因素及效率。

Studies on Falling Film Crystallization Process and Its Numerical Simulation;

用精馏-降膜结晶耦合工艺分离对二氯苯。

The mechanism of the film process was also illuminated.

本文还对膜分离含油污水的机理进行了探讨.

The presets range from simple exposure and film process emulation to radical color changes.

边框形式从简单的曝光范围，并且影片处理仿效到根本颜色改变。

Application of frequency speed-adjusting technology on high concentrated caustic soda by rotating film process

变频调速技术在旋转薄膜法高浓度烧碱中的应用

Vapor-Deposit Thin Film Process by Means of a Computer Simulation

汽相沉积薄膜过程的计算机模拟

Finally, computer simulation was carried out on the 3D non-isothermal viscous fluid and 3D isothermal viscoelastic fluid flow in a cast film process.

最后，对3D非等温粘性流体、3D等温粘弹性流体的薄膜流涎过程进行了模拟研究。

Thick film process used to prepare carbon nanotube ( CNT) cathode is studied. By investigation of CNT paste and sintering process, we can obtain uniform, flat CNT thick films with good field emission performance.

研究了制备碳纳米管（CNT）场发射阴极的厚膜工艺，通过浆料配方和烧结工艺等方面的探索，在Si基底上制作了均匀、平整、场发射特性良好的CNT厚膜。

Coalescent may help film formation process and improve filming properties.

成膜助剂可以改善乳胶漆的成膜过程，提高乳胶漆的涂膜性能

Simulation and analysis of model filling of resin film infusion process

树脂膜熔渗工艺充模过程的模拟与分析

A Method for Film Passivation Process Study and Its Application

薄膜钝化过程研究方法及其应用